Click Track Generator
Create a custom fixed-tempo click track, preview it, then download a WAV file.
Tempo
Track Structure
Sound & Export
120 BPM · 4/4 · 16 measures · 2-bar count-in · 0:36 total · 44.1 kHz WAV
Accuracy & privacy
The WAV is rendered locally in your browser from the selected tempo and meter. Browser preview latency can vary by device, but the exported file is generated from deterministic sample positions. No audio upload is required.
Troubleshooting
If preview audio is silent, interact with the page once and try Play again. Some browsers block audio until a user gesture. For long tracks, generation may use more memory.
Recent Tracks
No recent click tracks yet.
Create a Custom Click Track Online
A Click Track Generator creates a steady, downloadable timing reference that you can use for recording, rehearsal, practice, backing tracks, and DAW sessions. Set the BPM, choose a time signature, decide how many measures you need, add an optional count-in, and generate a WAV click track directly in your browser.
Unlike a standard Online Metronome, which is mainly designed for live practice, a generated click track can be exported as an audio file and placed directly into a project timeline. This makes it useful when musicians, singers, producers, or collaborators need the same fixed tempo reference.
How to Use the Click Track Generator
Creating a click track only takes a few steps:
- Enter your desired BPM or use Tap Tempo.
- Choose the time signature.
- Select the number of measures.
- Add a 1-, 2-, or 4-bar count-in if needed.
- Choose a subdivision such as quarter notes, eighth notes, triplets, or sixteenth notes.
- Select the click sound and accent level.
- Choose a WAV sample rate.
- Generate the track.
- Preview it before downloading.
- Download the finished WAV and import it into your recording or practice workflow.
If you do not know the tempo yet, the BPM Finder can help you estimate the BPM before generating the final track.
Click Track vs Metronome
A click track and a metronome both provide a steady timing reference, but they are used differently.
A metronome normally runs interactively. You choose a BPM, press Start, and practice while it continues playing.
A click track is a pre-generated audio file with a known length. That makes it better suited for:
- Recording sessions
- DAW projects
- Backing tracks
- Remote collaboration
- Rehearsal stems
- Performance preparation
- Video synchronization
- Practice sessions with a fixed structure
For real-time practice, use the Online Metronome. For a file you can download and place on a timeline, use the Click Track Generator.
BPM, Measures, and Click Track Duration
The duration of a click track depends on BPM, time signature, number of measures, and count-in length.
For a quarter-note pulse:
Seconds per beat = 60 ÷ BPM
At 120 BPM:
60 ÷ 120 = 0.5 seconds per beat
A 4/4 measure contains four quarter-note beats, so one measure at 120 BPM lasts:
4 × 0.5 = 2 seconds
A 32-measure click track therefore lasts:
32 × 2 = 64 seconds
A count-in adds extra measures before the main track begins.
If you need exact millisecond values for individual beats or subdivisions, use the BPM to Milliseconds Converter.
Choosing the Right Time Signature
The time signature determines how beats are grouped into measures.
For example:
- 4/4 groups four quarter-note beats
- 3/4 groups three quarter-note beats
- 5/4 groups five quarter-note beats
- 6/8 commonly organizes six eighth notes into two larger groups of three
The first beat of each measure is normally accented so that you can hear where each new bar begins.
If your project uses a common meter, you can also practice separately with the 4/4 Metronome or the 6/8 Metronome.
For a broader explanation of meter, beat grouping, and notation, see our guide to time signatures.
Add a Count-In Before Recording
A count-in gives performers time to prepare before the main section begins.
For example, a two-bar count-in at 120 BPM in 4/4 provides eight beats before the start of the actual click track.
Count-ins are useful when:
- Recording vocals
- Tracking drums
- Recording guitar or bass
- Starting a backing track
- Coordinating multiple musicians
- Preparing for a live cue
A longer count-in may be useful when performers need extra time to prepare, while one bar is usually enough for a quick entry.
The count-in is included in the generated WAV, so it remains available when the file is imported into another application.
Using Subdivisions
A subdivision adds smaller rhythmic clicks between the main beats.
The generator can create:
- Quarter-note pulses
- Eighth-note subdivisions
- Triplets
- Sixteenth-note subdivisions
Subdivisions can help when practicing difficult rhythmic material or recording passages where a basic quarter-note click does not provide enough timing information.
For example, a guitarist playing fast sixteenth-note passages may prefer sixteenth-note subdivisions during practice, while a drummer working on a shuffle may benefit from triplet-based timing.
For exact subdivision durations in milliseconds, the Note Length Calculator provides an additional timing reference.
Why Accent the First Beat?
A stronger downbeat makes the beginning of each measure easier to identify.
Without an accent, every click may sound identical, which can make it harder to keep track of longer phrases or unusual meters.
A typical 4/4 pattern sounds conceptually like:
ONE – two – three – four
The stronger first click provides orientation without changing the underlying BPM.
This is especially helpful in longer recordings, odd time signatures, and rehearsals where performers need to recognize bar boundaries quickly.
Exporting Your Click Track as WAV
The generator creates a WAV file directly in your browser.
WAV is useful because it is an uncompressed audio format supported by major DAWs and audio editors.
The tool provides common sample-rate options such as:
- 44.1 kHz
- 48 kHz
44.1 kHz is widely used for music playback and general audio work, while 48 kHz is common in video and many recording workflows.
When possible, use the same sample rate as your main project to avoid unnecessary conversion after importing the click.
Using a Click Track in a DAW
After downloading the WAV, import it onto its own audio track in your DAW.
A practical workflow is:
- Set the DAW project tempo.
- Generate the click at the same BPM and meter.
- Import the WAV at the start of the timeline.
- Check that its first beat aligns with the project grid.
- Route the click to headphones if you do not want it in the final mix.
- Record instruments or vocals against it.
- Mute or remove the click before exporting the finished song.
A generated click track is particularly useful when sharing timing references between systems that do not share the same metronome settings.
For more information on tempo in recording and production, see BPM in Music Production.
Click Tracks for Recording and Rehearsal
A click track is not only useful in the studio.
Bands can rehearse with a fixed click to improve consistency between sections. Singers can use it to practice entrances. Drummers can work on internal timing, and producers can use it as a reference when arranging material before the final rhythm section is recorded.
You can also combine a click track with backing stems when preparing live material.
The important point is that the click provides a reference—it does not replace musical feel. A performance can still use dynamics, articulation, phrasing, and intentional rhythmic placement while remaining centered around a stable tempo.
Accuracy and Technical Limitations
The mathematical spacing between generated clicks is based on the selected BPM and note structure.
For example, at 120 BPM, a quarter-note interval is exactly 0.5 seconds mathematically.
However, playback conditions can still vary because of:
- Browser behavior
- Device performance
- Audio drivers
- Bluetooth latency
- Operating-system processing
- External audio hardware
The exported WAV itself contains fixed sample positions, making it suitable as a stable timing reference once generated.
This tool is designed for fixed-tempo click tracks. It does not automatically create tempo ramps, tempo maps, changing meters, MIDI clock, or synchronization with an existing recording.
Privacy and Browser-Based Generation
The click track is generated locally in your browser.
You do not need to upload a song, recording, or personal audio file to create a basic click track. The browser creates the synthesized clicks, prepares the WAV data, and provides the resulting file for download.
Recent configurations may be stored temporarily in your browser session to make repeated generation easier. You can clear that history from the tool.
Frequently Asked Questions
What is a click track?
A click track is an audio timing reference containing repeated clicks at a specific BPM. Musicians and producers commonly use it while recording, rehearsing, or performing.
How is a click track different from a metronome?
A metronome normally plays interactively, while a click track is usually a fixed audio file that can be imported into a recording or playback system.
Can I download the generated click track?
Yes. The tool creates a WAV file that can be previewed and downloaded.
What BPM should I use?
Use the BPM of the song, exercise, or project you are working on. If you are learning difficult material, you may want to begin slower and gradually increase the tempo.
What is a count-in?
A count-in is one or more measures of clicks placed before the main track. It gives performers time to hear the tempo and prepare before recording begins.
Should I use subdivisions?
Use subdivisions when the main beat does not give you enough rhythmic information. Eighth notes, triplets, or sixteenth notes can make detailed passages easier to place accurately.
What sample rate should I choose?
44.1 kHz is common for general music projects, while 48 kHz is common in video and many recording workflows. Matching your DAW session sample rate is usually the simplest choice.
Can I create a 6/8 click track?
Yes. Select 6/8 as the time signature. Remember that 6/8 is often felt as two larger groups of three eighth notes, so accent and subdivision choices can affect how clearly the meter is perceived.
Can this generator create tempo changes?
No. The current tool is designed for fixed-tempo tracks. Projects requiring tempo ramps or multiple tempo sections should normally use a DAW tempo map.
Can I use the WAV in any DAW?
Most modern DAWs support standard WAV files. Import the file onto an audio track and align the first beat with your project timeline.